Satlink Ws-6979 Software Upgrade 2021 -

Ensure the meter has at least an 80% charge, or keep it plugged into the AC power adapter during the update. Step-by-Step Software Upgrade Procedure 1. Prepare the USB Flash Drive Insert the USB drive into your computer. Right-click the drive and select Format . Choose FAT32 as the file system and click Start.

After a successful firmware deployment, it is highly recommended to perform a through the system menu. This clears out residual cache files from the older software version, ensuring the new code runs smoothly. Note that a factory reset will wipe custom satellite configurations, so you will need to reconfigure your local timezone, preferred languages, and custom satellite positions. Satlink Ws-6979 Software Upgrade

: Once the update is complete and the device reboots, performing a factory reset Ensure the meter has at least an 80%

To help me tailor any troubleshooting steps or future firmware guides, let me know: What is your meter currently running? Right-click the drive and select Format

The software should indicate that it is sending the file. A progress bar will show the update process.

Turn off the Satlink WS-6979 entirely. Plug your prepared FAT32 USB flash drive into the USB port located on the side or bottom panel of the unit. Step 2: Navigate the Main Menu