buttons together. The LEDs will flash to indicate the current hours, minutes, and day of the week. Status Indicator LEDs : Indicates mains power is : Indicates the geyser is currently heating ( : Flashes to show the current selected Timer Program (e.g., 2 flashes = Program 2). Installation Basics
Rated for a maximum resistive load of 20A (approx. 4600W at 230V). kes geyser load control timer manual new
Check your clock configuration. Note if the display uses a 24-hour scale or standard 12-hour AM/PM flags. Internal microprocessor logic error or line voltage surge. buttons together
The KES timer allows up to 16 distinct ON and 16 OFF blocks. For most households, two heating cycles per day are sufficient. Setting Program 1 (First Heating Cycle) Installation Basics Rated for a maximum resistive load
The timer completely cuts power to the geyser, ignoring all automated schedules. Use this mode when going on vacation to prevent energy waste.
The Kes ISG1201 is a sophisticated yet user-friendly load management device. Its primary function is to prevent your electric geyser from operating during designated high-demand peak hours, typically in the morning and evening. By doing so, it helps shift energy usage to off-peak times, which can lead to significant savings on your electricity bill and reduces strain on the municipal power network.
Allows you to manually trigger a heating cycle if you need hot water immediately, provided it is outside of the restricted peak load state. Backup Power: Features a long-term internal battery