The Data Packet With Type-0x96- Returned Was Misformatted Repack 【VALIDATED | 2024】

Right-click each > Properties > Power Management .

When you get the error, it means:

The error message is a specific error (code 275 ) that occurs when using SPD Upgrade Tool or ResearchDownload to flash firmware onto Spreadtrum (Unisoc) based devices. It indicates a communication mismatch or data corruption during the flashing process, often occurring at the FDL2 stage. Potential Causes the data packet with type-0x96- returned was misformatted

When a network stack rejects a 0x96 packet, the issue usually stems from one of four areas: Right-click each > Properties > Power Management

Lower the MTU size on your network interface or VPN tunnel (e.g., from 1500 to 1400 or 1350) to see if fragmentation is causing the corruption. Potential Causes When a network stack rejects a

those specific boxes so the tool does not attempt to overwrite them.

Improperly installed or outdated Spreadtrum/UniSoC/MTK USB drivers (e.g., CDC Driver, VCOM Driver).