for configuring, testing, and flashing firmware onto SSDs that use the YS9082HP controller
The YS9082HP MPTool is a specialized utility for flashing firmware and repairing Yeestor YS9082HP-based SATA SSDs, commonly used on budget drives. It enables low-level operations such as NAND identification, capacity configuration, and RDT testing to revive corrupted drives. For the full, detailed guide to downloading and using the tool, visit USBDev.ru . Yeestor YS9082HP MPTools V8.00.00.01.033 ... - USBDev.ru ys9082hp mptool
Go to the tab. When asked for a password, leave the field empty and click OK. for configuring, testing, and flashing firmware onto SSDs
The drive should appear in the tool as "ROM MODE" or a generic 2GB device. Configure Parameters tab, click Edit Config . If asked for a password, leave it and click OK. to match your SSD (e.g., 240GB, 480GB, 512GB). Crucial Step: For many Yeestor drives, you must set Plane Mode Single Plane to avoid flash errors. Flash the Firmware Go back to the tab and click If successful, you will see a green Disconnect and reconnect the drive, then use Windows Disk Management to initialize and format the partition. Using the MPTool will erase all data Yeestor YS9082HP MPTools V8