Xycd60 | Manual Better

has four terminals: two for input (Battery) and two for output (Load/Charger). Connect to the DC Battery ( +Vpositive cap V −Vnegative cap V

Ensure correct wiring as the module may not have internal protection against reversed input. Relay Capacity: xycd60 manual

The Xycd60 manual is a comprehensive document that covers everything you need to know about your device. Here's an overview of what you can expect to find: has four terminals: two for input (Battery) and

| Mode/Function | Action | Feedback | Notes | | :--- | :--- | :--- | :--- | | | Fully press the tail switch. | Light turns on. | Use side switch for brightness adjustment. | | Off | Fully press the tail switch again. | Light turns off. | The last used illumination mode is memorized. | | Tactical Momentary | Half-press the tail switch. | Light turns on only while pressed. | Release to turn off. | | Change Brightness | Click the side switch. | Light cycles through brightness modes. | Order: Micro → Low → Middle → High → Ultra Bright. | | Strobe/SOS | Press and hold the side switch for 1.5 seconds. | Enters Strobe mode. | Click side switch to change: Strobe → SOS → Slow Flash. Press and hold 1.5s again to exit. | | Instant Turbo | Quickly double-click the side switch. | Activates ultra-bright illumination. | Directly accesses the highest brightness mode from any state. | Here's an overview of what you can expect