Users often have to use modified .inf files for the graphics driver to recognize the card.
1 × PCIe x16 slot (for dedicated graphics cards) PCIe x1: 1 × PCIe x1 slot PCI Legacy: 2 × PCI slots SATA: 4 × SATA II (3.0 Gbps) ports acer mcp73tad motherboard manual patched
If your system fails to POST (Power-On Self-Test) after a hardware change or an unstable BIOS configuration, you must clear the CMOS memory. Users often have to use modified
If your system fails to boot after a hardware change, locate the 3-pin jumper near the battery. Move the jumper from pins 1-2 to . Wait 10 seconds. Move it back to 1-2 . 3. Why Look for a "Patched" BIOS? Move the jumper from pins 1-2 to
Up to 4 GB DDR2 (8 GB maximum with specific patched BIOS and high-density modules) DDR2 667 / 800 MHz Expansion Slots 1 × PCI Express x16, 1 × PCI Express x1, 2 × PCI Storage Interfaces 4 × SATA II (3.0 Gbps) ports, 1 × IDE connector Rear I/O Ports
The official documentation provides the necessary board layout, jumper settings, and pinouts (especially for the front panel).